4 fod LED trailerplade med tågelygte med 12m kabel - LG550

4 Foot LED Trailer Board With Fog Light, 12m Cable – LG550

This 4 foot LED trailer light board with fog light is a ready-to-run solution for towing in all weather and low light. It covers all rear lighting functions in one robust unit, with a long 12 m cable for hassle-free hook-up on cars, vans and 4x4s. Fully ECE approved and IP67 rated, it’s built for professional use on European roads.

If you tow regularly, you don’t want to be chasing bad earths, broken bulb holders or short looms. LG550 is a complete, pre-wired LED trailer board that you hang, plug in and get moving. At 4 foot / 1200 mm long, it gives clear separation between left and right signals, improving visibility for following traffic and helping keep your trailer road-legal.

The board runs on 12–24 V, so it works across passenger vehicles, pick-ups, light commercials and tractors using a standard 7‑pin towing socket. All key rear functions are built in: stop, tail, indicator, number plate, reflector and a dedicated fog lamp. That fog light is important; on many trailers it’s either missing or unreliable, and that’s exactly what this unit solves.

The LG550 uses sealed LED lamps with an IP67 ingress protection rating, meaning they’re protected against dust and temporary immersion. In practice, that means repeated rain, spray and regular wash-downs aren’t a problem. With ECE R10, R3, R6 and R7 approvals, the lighting functions are compliant for road use across Europe, and the board is designed to minimise electrical interference with modern vehicle electronics.

Installation is straightforward. Mount or strap the 4 ft board to the rear of your trailer, route the 12 m cable forward, and plug into the 7‑pin socket. No crimping, no wiring diagram, no guesswork. It’s a practical, durable choice for workshops, fleet operators and trades who need a proven lighting board that simply works, day after day.

Key Features

• 4 Foot / 1200 mm board length for excellent signal separation and high rear visibility
• 12 m pre-wired cable reaches comfortably from rear of long trailers to the towing vehicle
• Multi-voltage 12–24 V operation suitable for cars, vans, 4x4s, light commercials and agri vehicles
• Full rear lighting functions: stop / tail / indicator / number plate / reflector / fog lamp in one unit
• Supplied fog light integrated into the board to keep trailers road-legal in poor visibility
• Fully wired with 7‑pin plug included, ready to use straight out of the box
• LED technology for low current draw, fast response and long service life compared with filament bulbs
• IP67 ingress protection for dust-tight construction and resistance to water during rain and wash-down
• ECE compliant: ECE R10, R3, R6, R7 approved for use on European roads
• Robust construction engineered for regular towing, fleet and commercial environments

Ideal Applications

• General purpose trailers – utility, camping, garden and box trailers
• Boat and jet-ski trailers needing a removable, sealed LED light board
• Car transporters and recovery trailers used on mixed fleets (12 V and 24 V)
• Agricultural and yard trailers towed by 4x4s, tractors or pick-ups
• Hire fleets and commercial operators needing a standardised, plug-in lighting solution

Why Choose LED-Global Lighting

LED-Global focuses on European‑engineered lighting built for real working vehicles, not just catalogue photos. Every product is specified with installers, fleet managers and technicians in mind: clear approvals, honest performance data and hardware that stands up to abuse. With LG550 and the rest of our range, you get proven components, consistent quality and dependable aftersales support from a specialist that lives and breathes vehicle lighting.