Barre d'avertissement LED 32" (800mm) clignotante ambre - LG638

32" (800mm) LED Warning Bar Amber Flashing – LG638

The 32" LED amber warning bar LG638 is a compact, high-output lightbar designed for professional use on road-going and off-road machinery. It delivers a strong, wide amber signal, with 29 selectable flash patterns and integrated white side position lights to keep long or wide vehicles clearly marked. Fully ECE R65 and R10 approved and IP67 rated, it’s built for demanding European fleets that need reliable, road-legal warning lighting.

This 800 mm LED warning bar is for operators who need clear visibility without a bulky roof setup. The smoked / dark tinted lens keeps the bar discreet when off, but once powered, the high-class LED diodes punch through poor weather, low light, and busy yards with a clean amber flash. It’s a 9–32 V DC system, so it runs happily on both 12 V and 24 V vehicles across mixed fleets.

You get 29 programmable flash patterns with memory. Set it once, and it powers back on with the last pattern used, which cuts installation callbacks and driver confusion. The integrated white LED side position lights make it ideal on flatbeds, recovery trucks, agricultural equipment and service vehicles where lateral visibility matters as much as front and rear warning.

The LG638 sits on a bolt mount base plate, giving a solid mechanical fixing suited to trucks, trailers, agricultural kit and construction machinery that see rough ground and vibration. With IP67 ingress protection, the housing is sealed against dust and temporary immersion, so routine washing and heavy rain aren’t a problem when it’s installed correctly. EMC performance is handled too: it’s ECE R10 approved and compliant with CISPR 25 Class 3, so it won’t interfere with radios, GPS, or sensitive control systems.

Sized at 790 × 150 × 75 mm (≈ 31.1 × 5.9 × 3.0 in), the bar is compact enough for light commercials, yet substantial enough for larger trucks and speciality plant. It arrives pre‑wired with the base plate and side position lights, so your auto electrician or in‑house workshop can get it mounted and running quickly on most flat surfaces or lightbar frames.

Key Features

• 32" (800 mm class) LED warning bar – compact footprint with strong presence on light commercials, trucks and machinery
• Voltage 9–32 V DC – suitable for mixed 12 V and 24 V fleets without extra converters
• Power 128 W – high-output LED array for strong amber warning in daylight and poor weather
• Amber flashing with 29 selectable patterns – from single flash to rapid attention-grabbing patterns, with memory function to recall the last setting
• Smoked / dark tinted lens – low-profile, discreet appearance when off; clean amber output when on
• Integrated white LED side position lights – improves side visibility and vehicle outline, ideal for long or wide vehicles
• Bolt mount base plate fixing – robust mechanical installation for trucks, trailers, agricultural and construction equipment
• Ingress protection IP67 – sealed against dust and temporary immersion, suitable for high-pressure wash environments when mounted correctly
• ECE R65 approved – compliant amber warning lightbar suitable for road use where R65 is required
• ECE R10 approved & EMC CISPR 25 Class 3 – tested to reduce electrical interference with radios, telemetry and vehicle electronics
• Dimensions 790 × 150 × 75 mm (≈ 31.1 × 5.9 × 3.0 in) – compact bar that fits most cabs, roofs, and lightbar frames

Ideal Applications

• Tractors, harvesters and agricultural machinery needing reliable amber roof beacons for field-to-road movements
• Construction and civil engineering vehicles such as dumpers, loaders, telehandlers and service trucks working on active sites
• Recovery trucks and roadside assistance vehicles that require strong, road-legal amber warning and side outline lighting
• Utility, municipal and highways vehicles including gritters, sweepers, inspection vans and maintenance fleets
• Trailers and low-loaders where a slim, robust amber bar with side position lights improves visibility from all angles

Why Choose LED-Global Lighting

LED-Global focuses on professional-grade vehicle lighting built for real European working conditions. Products like the LG638 are engineered with proven LED technology, solid EMC performance, and approvals such as ECE R65 and R10, so fleet managers and installers know they’re fitting compliant, dependable kit. Every bar is specified for long service life, straightforward installation and consistent performance, giving you fewer callouts, safer operators and vehicles that are clearly seen and fully road-ready.