3 LED Slank Rav Advarselsblink med 3M Klæbemontering - LG763

3 LED Slim Amber Warning Strobe with 3M Adhesive Mount – LG763

The LG763 3 LED slim amber warning strobe is a low-profile, high-impact warning light designed for modern commercial and agricultural fleets. It delivers a powerful amber flash from a compact 98 × 31 × 6.6 mm body, ideal where space is tight but visibility is critical. Approved to ECE R65 and ECE R10 with IP67 protection, it’s suitable for road use and proven in tough European weather.

This slim LED strobe solves a common problem: you need reliable amber warning on tractors, plant, or utility vehicles, but you’ve no room for bulky beacons. At just 6.6 mm thick, the LG763 sits almost flush with the bodywork, reducing the risk of impact damage while still pushing out a sharp, compliant warning signal. It runs on 12–24 V, so you can standardise across mixed fleets without worrying about voltage compatibility.

Inside, 3 high-output LEDs draw 9 W and drive 26 selectable flash patterns, from single flash to more aggressive attention-grabbing sequences. That means you can tune the light to the job, the environment, and your local policy. A clear lens with amber flash keeps the vehicle looking clean when the light’s off, yet delivers a crisp amber signal when powered.

The LG763 is ECE R65 approved, so it can be used as an amber warning device on public roads where this regulation applies. ECE R10 EMC and CISPR 25 Class 3 mean it’s been tested not to interfere with radios, GPS, CANbus, or other sensitive vehicle electronics – essential on modern tractors, harvesters, and construction machinery. IP67 ingress protection ensures the unit is dust-tight and can withstand temporary immersion, so mud, spray, and washing down aren’t a concern.

Installation is straightforward. The light comes pre-wired, so you’re not fighting with loose terminals in the field. The 3M adhesive mounting gives you a fast, drill-free option on clean, suitable surfaces – ideal for leased vehicles, bodywork you don’t want to pierce, or trial installations before permanent fitment. Where needed, installers often pair adhesive mounting with additional mechanical fixing for long-term heavy-duty use.

Key Features

• Universal 12–24 V operation – one part number for cars, vans, tractors, plant, and machinery across mixed fleets.
• 3 high-intensity LEDs / 9 W power draw – compact light source with strong, focused amber warning.
• 26 selectable flash patterns – gives flexibility to match site rules, road standards, or operator preference.
• Slimline design – 98 × 31 × 6.6 mm – low-profile body reduces snagging, impact damage, and visual clutter on modern cabs and panels.
• Clear lens with amber flash – discreet appearance when off, compliant amber signal when active.
• 3M adhesive mounting – quick, drill-free installation on suitable surfaces; ideal for leased or demonstrator vehicles.
• Pre-wired for easy connection – saves time on installation and reduces wiring errors in the field.
• IP67 ingress protection – dust-tight and resistant to temporary immersion, suitable for wash-down and wet on-site conditions.
• Approved to ECE R65 and ECE R10 – road-legal amber warning (where R65 is required) and safe for use on modern electronic systems.
• EMC CISPR 25 Class 3 compliant – minimises electrical noise, helping protect radios, GPS, and control systems from interference.
• Operating temperature -30 to +50 °C – engineered to work reliably in European winters and hot summer conditions.

Ideal Applications

• Agricultural machinery – tractors, harvesters, sprayers, and telehandlers needing slim amber warning on cabs, mudguards, or tool frames.
• Construction and plant – excavators, dumpers, rollers, and loaders working on highways, quarries, and construction sites.
• Utility and service vehicles – roadside maintenance, telecoms, rail, and council fleets requiring compact, R65-compliant warning.
• Light commercial vehicles and vans – rooflines, grilles, and rear doors where space and aesthetics matter.
• Material handling and site vehicles – forklifts, yard tugs, and small machinery needing clear visual signalling in busy yards.

Why Choose LED-Global Lighting

LED-Global builds lighting the way engineers expect it: tested, compliant, and built to last in real fleets, not just on paper. Our products draw on European design and engineering standards, with a focus on reliability, EMC safety, and straightforward installation for professional fitters. When you choose LED-Global, you get consistent specifications, proven approvals, and support from people who understand how these lights are used on farms, sites, and roads every day.