6 LED Schlanke Positionsleuchte (ROT) - LG118

6 LED Slim Marker Light (Red) – LG118

The LG118 6 LED slim red marker light is a compact, flat surface-mount sidemarker engineered for professional use on trucks, trailers and machinery. It uses high-intensity Osram LEDs to give a clean, consistent red marker line along the vehicle, improving visibility in low light and night work. Fully ECE approved and EMC suppressed, it’s built for road use across Europe and for tough off-road conditions.

This slim red marker exists for one reason. To make the outline of your vehicle obvious, every time, without fuss. On a long trailer, an artic, or a slurry tanker in the yard at 3 a.m., that thin red line tells other drivers exactly where the vehicle ends.

The LG118 uses 6 × 0.1 W high-intensity Osram diodes behind a durable PMMA lens and heavy-duty plastic housing. That combination gives you over 50,000 hours of service life, with stable light output and no filament failures. Nominal power draw is just 0.6 W, so you can run multiple units along a trailer or body without worrying about load on a 12 V or 24 V system. It’s designed for 10–30 V DC, so it drops straight onto modern fleets, mixed-voltage yards and agricultural machinery.

On the road, the LG118 is ECE approved / e-marked, so it’s suitable as a red side or rear marker where regulations require it. EMC / radio suppression means it won’t interfere with modern telematics, radios or other sensitive electronics on the vehicle. With an IP67 splashproof rating, the unit is sealed against dust and can handle rain, spray and regular washing. That’s why fleets use this style of lamp on curtain-siders, tippers, low-loaders and livestock trailers that see hard work and harsher weather.

Installation is straightforward. The lamp is pre-wired, so you simply mount on a flat surface and connect to your marker circuit. With a width of 96 mm, height of 20 mm and thickness of 8 mm, it sits low and neat on bodywork, bumpers or chassis rails. Where you’re mounting to a bull bar or tubular section, you can add the optional bull bar gasket (LG116G) for a clean, secure fit.

Key Features

• Slim flat surface-mount design – only 8 mm thick, 96 mm wide and 20 mm high for a low-profile, tidy installation on bodywork or bars.
• 6 × 0.1 W high-intensity Osram LEDs – proven European-quality diodes for stable output and long-term reliability.
• Red marker light output – ideal as a side or rear outline marker to improve visibility and vehicle recognition in low light.
• Wide voltage range 10–30 V DC – suitable for both 12 V and 24 V commercial, agricultural and construction electrical systems.
• Low power consumption – 0.6 W nominal – easy on batteries and alternators when running multiple marker lamps on long trailers.
• Long lifespan – 50,000 hours+ – reduces replacement intervals, workshop time and whole-life lighting costs.
• PMMA lamp finish with heavy-duty plastic housing – impact-resistant, durable construction for demanding road and off-road environments.
• IP67 splashproof enclosure – dust-tight and protected against immersion in water up to 1 m, ideal for rain, spray and regular washdowns.
• ECE approved / e-marked – compliant for road use across Europe when installed as per regulations.
• EMC / radio suppression – minimises electrical noise, protecting radios, CAN bus systems and telematics from interference.
• Pre-wired for quick fitment – reduces installation time for fleet electricians and bodybuilders.
• Optional bull bar gasket (LG116G) – supports neat mounting on tubular bull bars and similar curved surfaces.

Ideal Applications

• Articulated trucks and trailers – side and rear outline marker on curtainsiders, box trailers and skeletal trailers.
• Agricultural machinery – tractors, slurry tankers, grain trailers and bale trailers working on-road and in the yard.
• Construction and plant equipment – low-loaders, tippers, hooklifts and support vehicles on site.
• Commercial vans and recovery vehicles – body-mounted side markers on LCV builds, recovery trucks and specialist conversions.
• Municipal and utility fleets – refuse trucks, gritters, maintenance vehicles and service trailers where clear side marking is essential.

Why Choose LED-Global Lighting

LED-Global focuses on European-engineered vehicle lighting that does what it says and keeps doing it, year after year. Every product, including the LG118, is specified around real fleet conditions: voltage spikes, harsh weather, constant washing and long hours.

We work with trusted LED and materials suppliers, validate products against ECE regulations and EMC standards, and back them with consistent technical support. So when you fit an LED-Global marker, you know it’s built for the job, not just to tick a box in a catalogue.