LED-Pfostenmontierte Warnleuchte - Grün - LG695

LED Pole Mounted Warning Beacon – Green – LG695

The LG695 green LED pole mounted warning beacon is built for operators who need clear, highly visible safety signalling without constant maintenance. It delivers strong 360° green warning light from 40 high-output SMD LEDs, with a flexible rubber stem that shrugs off knocks and vibration. ECE R10 and CISPR 25 Class 3 EMC approvals mean it plays nicely with modern vehicle electronics and radio equipment.

This beacon is designed as a pole mounted safety light for vehicles where visibility and compliance matter: plant and construction machinery, agricultural equipment, service vehicles and industrial fleets. It runs on 10–30 V, so it’s ready for both 12 V and 24 V systems without extra hardware. With an IP67 rating, it’s sealed against dust and temporary immersion, so it stands up to harsh European weather and daily wash-downs.

The high quality flexible rubber stem is the unsung hero here. Machines get bumped. Poles get snagged. A rigid beacon cracks; this one bends and springs back, reducing breakages and downtime. The 40 SMD LEDs are arranged for full 360° output, giving strong, even warning light that cuts through low light, rain and dust on yards, farm roads and construction sites.

You get 3 flash patterns, so your electrician or fitter can match site or fleet standards with a simple wiring change. The unit is approved to ECE R10 and EMC – CISPR 25 Class 3, so it’s been tested for electromagnetic compatibility and radio frequency suppression. That matters when you’re running CANbus systems, telemetry, seat belt warning systems, and in-cab comms – you don’t want the beacon upsetting them, or the other way round.

Installation is straightforward for any competent auto electrician. The pole mounted base fits standard beacon pole mounts on tractors, telehandlers, forklifts, sweepers and light commercials. At 209 mm x 127 mm, it’s compact enough for tight roof lines but still large enough to be seen in busy yards and depots. It’s also suitable to work with seat belt systems, so it can be integrated into safety interlocks where a green beacon confirms restraint use or safe status.

Key Features

• 10–30 V DC operating range – works with both 12 V and 24 V vehicle systems without extra converters
• 40 SMD LEDs – high-output diodes for bright, even 360° green warning light and a long service life
• Green pole mounted beacon – ideal for safety status indication (e.g. seat belt in use, safe-to-operate, first-aider or marshal vehicles)
• 3 selectable flash patterns – choose the flash mode that matches your site or fleet standard
• Flexible rubber stem – high quality rubber pole that flexes under impact, reducing damage on busy sites
• IP67 rated housing – fully dust-tight and protected against temporary immersion, suitable for outdoor and wash-down environments
• ECE R10 approved – compliant with European electromagnetic compatibility standards for road-going and off-road vehicles
• EMC – CISPR 25 Class 3 – radio frequency suppression to protect in-cab radios, GPS, telematics and control electronics
• Suitable to work with seat belts – can be used as a visual confirmation beacon in seat belt or safety interlock systems
• Compact dimensions: 209 mm x 127 mm – easy to position on cabs, roll bars, roof rails and machinery frames

Ideal Applications

• Agricultural machinery – tractors, sprayers, telehandlers and loaders needing a green status or safety indication beacon
• Construction and plant – excavators, rollers, dumpers, access platforms and site vehicles in regulated work zones
• Warehouse and industrial – forklifts, sweepers and yard vehicles where green beacons are required for seat belt or safe-operation indication
• Service and fleet vehicles – utility vans, maintenance trucks and support vehicles needing clear, compliant green warning light
• Municipal and facilities equipment – parks, grounds, airport and campus vehicles needing visual safety signalling

Why Choose LED-Global Lighting

At LED-Global we focus on practical, proven lighting for working vehicles. Our products are engineered for European conditions, from wet farm tracks in January to hot, dusty yards in July. Every warning beacon we supply, including the LG695, is built around high-quality LED technology, robust housings and tested electronics, so your install is one less thing to worry about.

We back that up with clear specifications, recognised ECE and EMC approvals, and designs that make sense to the mechanic who has to fit them and the operator who has to trust them. If you need reliable, compliant green warning beacons for professional fleets, this is exactly what it’s built for.