12" (300mm) LED Warning Bar 1 Bolt Amber - LG655

12" (300mm) LED Warning Bar 1 Bolt Amber – LG655

This 12" amber LED warning bar delivers strong, focused warning light in a compact footprint, ideal for tight mounting spaces on modern vehicles. Running on 12–24 V DC and drawing 72 W through 24 × 3 W LEDs, it’s engineered for professional fleets that need reliable, road-legal visibility. Fully ECE R65 and ECE R10 approved, IP67 sealed and EMC safe to CISPR 25 Class 3, it’s ready for daily service on the road or on-site.

---

If you need a small but serious LED beacon bar for tractors, plant or utility vehicles, this is it. One sturdy 1‑bolt mount. A clear amber 360° warning signal. And 8 selectable flash patterns so you can match site rules, fleet standards or local regulations without rewiring or swapping hardware.

The LG655 runs on 12–24 V DC, so it works across mixed fleets of vans, pickups, lorries, agricultural kit and construction machinery. The 72 W output from 24 high-output 3 W diodes gives a clean, punchy warning flash that cuts through poor weather, dust, yard lighting and LED headlamps around you. At 300 × 159 × 75 mm, it’s compact enough for roofs, light bars, cross-members or ROPS frames where space is tight but visibility is critical.

This warning bar is ECE R65 approved for amber warning light and ECE R10 compliant for electromagnetic compatibility, with CISPR 25 Class 3 EMC performance. That means it’s suitable as a road-legal amber warning beacon in markets recognising these approvals, and it won’t interfere with radios, GPS or CAN-based vehicle systems when installed correctly. The IP67 ingress protection rating means the unit is fully dust-tight and resists temporary immersion, so heavy rain, wash-downs or muddy field work aren’t a problem.

Installation is straightforward. The single-bolt mounting keeps fitting time down and suits metal roofs, brackets and bars; power is supplied via the included cable, ready to tie into a switched feed or dedicated warning light circuit. With a design life of 50,000+ operating hours, you can fit it once and expect years of dependable service with minimal maintenance, even on vehicles that run long shifts every day.

---

Key Features

• Compact 12" (300 mm) warning bar – ideal where space is limited but a strong amber warning light is required.
• Wide input range 12–24 V DC – works across cars, vans, HGVs, agri and plant without additional converters.
• High output 72 W LED power – 24 × 3 W LEDs deliver a bright, attention-grabbing amber warning signal for professional use.
• 8 selectable flash patterns – choose the flash mode that matches site rules, fleet standards or personal preference.
• Robust 1‑bolt mounting – simple, strong and quick to install on roofs, bars or brackets.
• ECE R65 approved amber warning – suitable for road-legal hazard and warning applications where this standard applies.
• ECE R10 compliant with EMC – CISPR 25 Class 3 – designed to minimise electrical noise, helping protect radios, GPS and on-board electronics.
• IP67 ingress protection – fully dust-tight and resistant to temporary immersion, ideal for outdoor and off-road environments.
• Long operating lifetime 50,000+ hrs – built for intensive daily use with reduced downtime and replacement costs.
• Practical dimensions 300 × 159 × 75 mm – easy to integrate with existing roof bars, ROPS, cages and vehicle bodies.

---

Ideal Applications

• Agricultural machinery – tractors, sprayers, telehandlers and harvesters working on-road and in-field.
• Construction and plant – excavators, dumpers, rollers, loaders and site vehicles needing clear hazard marking.
• Utility and municipal fleets – road maintenance, refuse collection, gritting, drainage and inspection vehicles.
• Recovery and transport – breakdown vans, recovery trucks, low-loaders and escort vehicles.
• Light commercial and service vehicles – vans and pickups used for traffic management, field service and engineering support.

---

Why Choose LED-Global Lighting

At LED-Global, we build lighting the way professionals expect it: well-engineered, correctly approved and ready to work hard. Every warning bar, including the LG655, is specified for European conditions and tested against the standards that matter: ECE lighting approvals, EMC safety and robust IP ratings.

You get products that install cleanly, behave properly with modern vehicle electronics and stand up to long shifts in real fleets. That’s the difference with a specialist European supplier focused solely on high-performance vehicle lighting.