4 LED Slim Amber Warning Strobe with 3M Adhesive Mount – LG764

The LG764 is a compact 4 LED slim amber warning strobe designed for tractors, vans, commercial vehicles, plant machinery, recovery vehicles and utility fleets. Its ultra-low-profile design makes it ideal for installations where space is limited but strong amber warning visibility is still required.

With 12–24 V operation, 26 selectable flash patterns, ECE R65 approval, ECE R10 compliance and IP67 protection, the LG764 is built for professional road, site and agricultural use. The clear lens gives a discreet appearance when switched off and a strong amber warning signal when activated.

Ultra-Slim Amber LED Warning Strobe

The LG764 measures just 98 × 31 × 6.6 mm, making it suitable for tight mounting positions on grilles, bumpers, side panels, tailgates, toolboxes and machinery bodywork. Its slim housing sits close to the surface, reducing the risk of knocks, snagging or damage during daily operation.

Despite its compact size, the 4 LED design provides a clear and attention-grabbing amber flash for improved vehicle visibility in busy yards, roadside work areas, construction sites, farm entrances and low-light conditions.

26 Flash Patterns for Flexible Warning Setup

The LG764 offers 26 selectable flash patterns, allowing installers and fleet operators to match the warning output to vehicle type, site requirements or fleet standards. This makes it suitable for single-light installations as well as multi-strobe setups across larger vehicles.

The amber warning output is suitable for professional applications where visibility and compliance are important, including roadside assistance, utility work, agricultural transport and construction support vehicles.

Fast Installation with 3M Adhesive Mount

The 3M adhesive mounting option allows a clean and secure installation on properly prepared surfaces without drilling. This is especially useful for leased vehicles, modern body panels, tight installation areas or applications where reducing corrosion risk is important.

The light is pre-wired to help reduce installation time and supports 12 V and 24 V electrical systems, making it practical for mixed fleets using vans, trucks, tractors, plant machinery and commercial vehicles.

Built for Harsh Outdoor Conditions

The IP67-rated housing protects the strobe against dust, water spray, road grime and temporary immersion. This makes the LG764 suitable for year-round use in rain, mud, wash-down conditions and demanding outdoor environments.

With an operating temperature range from −30 °C to +50 °C, it is built to perform reliably in cold winter mornings, wet working conditions and warm summer site use.

Road-Ready and EMC Safe

The LG764 is ECE R65 approved for amber warning light performance where permitted and ECE R10 approved for electromagnetic compatibility. CISPR 25 Class 3 EMC performance helps reduce interference with radios, GPS, CANbus systems and other sensitive vehicle electronics.

This makes it a dependable choice for modern vehicles where warning visibility, electrical stability and compliance all matter.

Key Features

• 4 LED slim amber warning strobe for professional vehicle use.
• Ultra-low-profile 98 × 31 × 6.6 mm housing for tight mounting areas.
• 12 W total output from 4 high-intensity LEDs.
• 12–24 V operation for mixed vehicle fleets.
• 26 selectable flash patterns for flexible warning setup.
• Clear lens with strong amber flash output.
• 3M adhesive mounting option for clean drill-free installation.
• Pre-wired design for faster fitting.
• IP67 protection against dust, spray, rain and wash-down conditions.
• ECE R65 approved for amber warning light applications where permitted.
• ECE R10 approved for automotive EMC compliance.
• CISPR 25 Class 3 EMC performance to help reduce electrical interference.
• Operating temperature range from −30 °C to +50 °C.

Ideal Applications

• Agricultural vehicles including tractors, sprayers, harvesters and telehandlers.
• Construction and plant machinery including excavators, dumpers and rollers.
• Utility, telecoms, council and service vehicles.
• Recovery trucks, roadside assistance vehicles and incident response units.
• Vans, pickups and compact commercial vehicles with limited mounting space.
• Fleet vehicles requiring compact amber warning strobes.

Why Choose the LG764 LED Warning Strobe?

The LG764 is designed for professional users who need strong amber warning visibility in a compact and easy-to-install package. Its slim housing, 26 flash patterns, adhesive mounting option, IP67 protection and road-ready approvals make it a practical solution for daily fleet, site and agricultural use.

For installers, fleet managers, farmers, contractors and recovery operators, this amber LED strobe offers dependable visibility, clean installation and reliable performance in demanding working conditions.

Important Fitment Note

Please check the mounting surface, wiring layout, voltage system and local amber warning light regulations before installation. For adhesive mounting, the surface must be clean, dry and properly prepared to ensure a secure bond.