LED Burger Combination Tail Light with Dynamic Indicator - LG527

LED Burger Combination Tail Light with Dynamic Indicator – LG527

The LED Burger Combination Tail Light with Dynamic Indicator – LG527 gives you a compact, road-ready rear lamp with stop, tail and flowing indicator in one neat unit. It’s designed for 12–24 V systems, so it drops straight onto most trailers, plant, vans and commercial bodies. Fully ECE approved and IP67 rated, it’s built for European roads and harsh working environments.

This LED burger rear light solves a common headache: limited space but a need for clear, modern signalling. You get three key functions in one lamp – stop, tail, and a dynamic (sequential) indicator that sweeps across when you signal. That moving light pattern stands out in traffic, giving following drivers a clear, unmistakable signal, even in poor visibility.

The LG527 runs on 12–24 V, so it suits mixed fleets with both light commercials and heavier kit. The slim housing keeps the profile tight to the bodywork, which helps avoid impact damage on busy sites and tight yards. At 140 mm × 35 mm, it’s small enough for compact builds, but bright and clear enough for full-size trailers when installed in pairs.

From a compliance point of view, this unit is approved to ECE R6 (indicator) and ECE R7 (tail/stop), so it’s road-legal when fitted correctly on compliant vehicles. EMC performance meets CISPR 25 Class 3, which helps protect against radio interference in modern vehicles full of electronics, telematics and comms gear. With an IP67 ingress protection rating, the lamp is sealed against dust and can withstand temporary immersion – ideal for vehicles that see rain, spray, mud and regular washing.

Installation is straightforward. The LG527 is supplied with a 1 metre cable, giving auto electricians decent routing options back to junction boxes or looms. You can flush mount with a gasket for a clean, integrated look, or surface-mount using a bracket where cut-outs aren’t practical. That flexibility is handy on mixed fleets where bodies, bumpers and panels vary from vehicle to vehicle.

Key Features

• Combination tail light with 3 functions – stop, tail and dynamic indicator in one compact LED unit to simplify wiring and reduce lamp count.
• Dynamic (sequential) indicator – flowing amber signal pattern for improved visibility and clearer intention to following traffic.
• Wide voltage range: 12–24 V – suitable for light commercials, trailers, agricultural machinery and plant across mixed fleets.
• Slim housing design – low-profile lamp helps reduce impact risk and suits modern bodywork and compact installations.
• ECE R6 and ECE R7 approved – road-legal signalling when installed on compliant vehicles in accordance with regulations.
• EMC compliant: CISPR 25 Class 3 – designed to minimise radio frequency interference with vehicle radios, telematics and control systems.
• Ingress Protection IP67 – fully sealed against dust and protected against temporary immersion, ideal for wet, dirty or high-wash environments.
• Compact size: 140 mm × 35 mm – easy to position on tight rear panels, tailgates, tool bodies and small trailers.
• 1 metre pre-wired cable – simplifies connection into existing looms and junction boxes, saving time on installation.
• Flexible mounting options – flush-mount with gasket or surface-mount with bracket to suit different body constructions.

Ideal Applications

• Trailers and transporters – general haulage, car transporters, plant trailers and box trailers needing compact LED combination rear lights.
• Light commercial vehicles and vans – service vehicles, utility vans and conversions where space on the rear panel is limited.
• Agricultural and off-road equipment – tractors, telehandlers and implements working in mud, spray and washdown conditions.
• Construction and municipal vehicles – tippers, refuse trucks, sweepers and maintenance fleets needing robust, low-profile rear lighting.
• Specialist bodies and bespoke builds – recovery trucks, service bodies, welfare units and mobile workshops requiring clean, modern LED rear lighting.

Why Choose LED-Global Lighting

LED-Global focuses on European-engineered lighting that works hard in real fleets, not just on the spec sheet. Products like the LG527 are chosen by installers and fleet managers who care about compliance, uptime and clean installations. Every lamp is built around proven electronics, consistent light output and solid EMC performance, so you spend less time chasing faults and more time keeping vehicles on the road.